10,000+ reviews
Europe's online specialist for lamps
Return within 30 days
Checkout using your account
Checkout as a new customer
Creating an account has many benefits:
- See order and shipping status
- Track order history
- Check out faster
3-phase track light system
3-phase track lighting
With a 3-phase track lighting system, you can create three different circuits on the track. For each track spotlight and track lamp, you can specify whether the lamp should operate on phase 1, 2, or 3. This way, you can easily install one track system on a single power point and still apply three separate switches. It is also possible to control all the lights on a 3-phase track at once if they are on the same phase. This allows you to keep the option open to control the lights individually in the future. To guide you through the process, we have gathered and organised all the relevant information. It is also possible to control all three separately. The 3-phase track is useful if you don't always want all the track lights (on all sides) to be on. 3-phase track lighting is primarily used in commercial spaces.
Step 1: Track
Step 2: Power
Step 3: Connector
Step 4: Lighting
Step 5: Accessories
Step 1. Choose track
Tracks are available in various colours and sizes. Below, you can choose from black, grey, and white tracks.
Black track
White track
Step 2. Choose power connection
Connection box, earth left
The earth at this starting point is on the left. This adapter can easily be connected to 220-240V. This component is therefore necessary to provide electricity to your 3-phase track.
Connection box, earth right
At this starting point, the earth is on the right. This adapter is required to provide electricity to your 3-phase track and can be easily connected to 220-240V.
Connection box, middle
Step 3. Choose a connector
Standard connector
For straight sections, you can use a standard connector to join two tracks.
T-connector
With the T-connector, you can connect three tracks at a right angle.
Cross connector
Join four tracks at a right angle using the cross connector.
Corner connector
To create a 90-degree angle, use a corner connector.
Flexible connector
Step 4. Choose lighting
Silver track lights
Black track lights
Step 5. Choose accessories
End cap
With an end cap you can close the track.
Suspension kit
With a suspension kit, it’s possible to mount the tracks without directly attaching them to the ceiling.
Ceiling bracket
This bracket can be clipped onto the top of the 3-phase track. The bracket has holes for screws, allowing for direct mounting to the ceiling.
Pendant adapter
The pendant adapter allows you to install regular pendant lamps in the track system.
Surface mount base